Inline PRO Race Spec F20C/F22C Timing Chain TensionerInline Performance
This product is lifetime warranty through InlinePRO.
As you may already know, there are many problems
associated with the stock timing chain tensioner.
Here are some of the most common problems
that develop with the stock unit:
-The timing chain stretches and the guides wear over
time creating excessive slack in the overall assembly.
-When throttle is lifted after a high rpm pull, the sudden
change in momentum causes excessive slack in the timing chain.
This also causes a sudden change in oil pressure
in the stock tensioner.
-Sudden downshifts in the transmission or engine braking also
further exaggerates the slack in the chain mechanism.
-Installing higher tension valve springs and high lift
camshafts will also contribute to the problem with chain slack.
-The most common problem is the noise associated with start-up
and idling, which has to do with lack of oil pressure behind
the tensioner piston and excessive wear on the worn screw gear.
*** ALL OF THE CONDITIONS MENTIONED ABOVE WILL OVER
WORK THE STOCK TENSIONER AND CAUSE THEM TO FAIL OVER TIME.***
WARNING - DO NOT USE OUR 3MM HEADGASKET. SERVERE ENGINE DAMAGE WILL OCCUR***
InlinePRO developed the race tensioner to address and fix all the problems
-Used cores may show signs of wear.
*** InlinePRO Timing Chain Tesioners are made to order, so please allow 2-3 business days for your order to be made before it will ship out***